Spiral Pipe Mill Making Machine
Raw material coil parameters:
Thickness of steel plate: 6~28mm
Width of steel plate: 800~2100mm
Outside dia. of coil: Φ1800~Φ2200mm
Inside dia. of coil: Φ600~Φ760mm
Max weight of coil: 40 Tons
Product pipe parameters:
Dia. of Pipe: Φ475~Φ3820mm
Thickness of pipe: 6~28mm
Length of pipe: 8~12.5m
Welding speed: 0~2.5m/min
Welding type: Submerged-arc welding
Steel grade: Q235 Q355 X52 X60 X70 X80
Standard: API-5L AWWA ISO3183 GB/T9711 SY/T5037 SY/T5040
Outlet capacity per year: 50,000.00-100,000.00 tons
Product Purpose:
Oil, natural gas, low pressure fluid transportation, structure, filtration etc
Main components of equipment:
>Continuous Spiral forming and welding section
>Deslagging and manual inspection
>X-ray testing(the first welding-seam inspection)
>Repairing welding section
>Pipeline finishing equipment
>Endfacing&Beveling machine(single station, head-on layout, double bases)
>Hydro-tester machine(four pull box beams, oil-water balance system, automatic curve recording and printing system)
>Offline UT testing
>Pipe-end expanding machine(expander)
>Weighing, length measuring, marking
SPIRAL CONTINUOUS WELDED PIPE LINE SPEC LIST | |||
NO. |
Model |
Dia. Of Pipe(mm) |
Thickness(mm) |
1 |
ZHCLX-01 |
Φ475~Φ1420 |
6~16 |
2 |
ZHCLX-02 |
Φ475~Φ1820 |
6~20 |
3 |
ZHCLX-03 |
Φ508~Φ2220 |
6~22 |
4 |
ZHCLX-04 |
Φ508~Φ2620 |
6~22 |
5 |
ZHCLX-05 |
Φ600~Φ3020 |
6~25.4 |
6 |
ZHCLX-06 |
Φ600~Φ3420 |
6~25.4 |
7 |
ZHCLX-07 |
Φ700~Φ3820 |
6~28 |
Keywords:
Spiral continuous welded and forming section, uncoiler, coil car, vertical side roller, pinching and leveling roller, shearing and butt-welding machine, pinching device, joint car, storage loop, leveller, edge miller, online UT tester, main driver, prebending and guide board, forming machine, inside welding device, flying plasma cutter, payoff table, pipe carrier car, lincoln welder, automatic seam-tracking system, welding-flux recycle system, welding-flux treatment system.
Weld-flag cleaning system, manual inspection section, X-ray testing, repairing welding section.
Finishing section, endfacing&beveling machine, hydrotester, rotating roller, conveyor, pipe table, pulling device, pipe stopper, offline UT tester.
Hydraulic station, group valve, hydraulic piping, lubrication system, HMI system, touch screen, PLC, control cabinet, operating desk, frequency converter, proximity switch, sensor.
Siemens, Rexroth, Schneider, AB, Yaskawa, LG
http://www.tyzhhw.com/